This machine is used for attaching the Loop Handle to a Side Seal or Bottom Seal bag.

It is capable of giving a production of about 15-20 bags/min depending on the Operator. The machine is operated through a Foot switch which will Open the bag, Insert the Loop Film and seal both the handles in one stroke.

The Automatic machine will convert either a Tubular roll or a Lay flat film into a Side Seal bag and Attach the Loop handle or a Reinforced Patch handle Automatically inline on the machine. The machine is equipped with a Dual Servo System for higher productivity and to maintain tension on the film. The machine is capable of running upto a maximum speed of 80 Strokes/min.

Wide Width Bottom Weld Machine specially designed for Heavy duty LDPE and HDPE Liner bags. The technology used here is quite different from the regular smaller width Bottom Seal machine.

Servo Motor Driven machine used for Film Indexing. The sealing of the film is done by a wire seal system which gives a very strong seal. The cutting is done through a mechanically driven Rotary Flying knife. The setting of the cutting knife is much simpler compared to the Shear (scissor type) knife used on regular Bottom seal machine.

The High speed Twin Track T-shirt bag making machine Model VTX-350 Ultima is able to run at a maximum speed of 300 Strokes/minute and thus get a production of 600 Bags/min. You can simultaneously run 2 Printed Pre-Gusseted Tubular Roll on the machine. The machine is equipped with Two Servo Motor & Drive System with Dual Photocell for sensing the Print Mark and thus it is possible to convert 2 Rolls simultaneously

The film is Sealed and Cut using a Hot Knife and stacked together Automatically into bunches of 50 bags. Once the Batch count is reached, the Gripper function on the machine will take the Bunch of bags forward to the Online Punching station where the Handle Punching is done and you get the ready finished bags on the Auto Conveyor.